Northfagcom

Angular contact bearing is a kind of ball bearing. It is able to carry radial load and axial load at the same time, meanwhile, it can also endure pure axial load, together with high limited speed. The carrying capacity of axial load is decided by the contact angle, the bigger contact angle, the higher carrying capacity of axial load. They are widely used in heavy industry, such as manufacturing, chemical and agricultural, etc. Moreover, they can also be applied in turbines, heavy transportation equipment like airplanes.

It could be further divided into other types which includes single-row angular touch ball bearings and double-row angular touch ball bearings. The previous you'll most effective convey axial load from unmarried course, and further axial force will be triggered when bring radial load, and the shaft and housing are handiest limited moved in a single path. And as to the latter, if paired bearings are installed, make a couple of outer ring opposite, this is huge faces and slender faces are opposite one by one, which could keep away from additional axial force, and additionally limit shaft and housing into the axial clearance variety in two course.

And the unmarried-row angular contact ball bearings are particularly used in spindle of lathe, motor with excessive frequency, gas turbine, centrifugal device, front wheel of small auto, and differential tools shaft. And the double-row angular touch ball bearings are mainly carried out in oil pump, roots blower, air compressor, all sorts of gear box, fuel injection pump, and printing equipment, etc.

This type of bearing has many characteristics. To start with, while in comparison to the deep groove ball bearings of same dimensions, their load capacities are higher. secondly, they can be used for bearing radial-axial combined hundreds or pure thrust loads. Thirdly, they've low working friction and excessive proscribing pace.

Since they may be so crucial merchandise in our industries, it's miles pretty important for us to recognize some thing approximately its operation. Usually, the angular contact bearing's races (steel surfaces between the bearing balls) and bearing balls are hooked up at an angle, typically of 15, 30 or 40 tiers, relative to the bearing's operating axis. This design allows the bearings to address masses with each a radial and axial thing. And there is also plenty friction that's resulting from the radial-axial load mixtures. This kind of bearing can work to substantially lessen the exceptional amount of friction.

All in all, the angular contact bearing http://www.northfag.com/ is an important category of ball bearings. Its application is very wide. And it can be used to meet various requirements.